Aerospace CCA repair · self-paced
Read the board. Find the fault.
Document the repair.
A complete technician course and a working bench toolkit: schematics and components, DMM & oscilloscope technique, digital and analog troubleshooting, Teradyne ATE, plus printable travelers, checklists and quick-reference cards you actually use at the station.
Learn — the 10-module course
Electronics Foundations
02Reading Schematics
03Component Identification & How Each Part Fails
04DMM Mastery
05Oscilloscope Mastery
06Troubleshooting Methodology
07Digital Board Troubleshooting
08Analog Board Troubleshooting
09Teradyne Machines & Automated Test (ATE)
10Aerospace Standards, ESD, and Workmanship
Work — bench tools & references
Bench Mode
Glanceable thresholds, codes, polarity and failure modes for use while you work.
⑃Decision Trees
Interactive fault trees — dead board, shorted rail, ICT ticket triage, and more.
∿Bench Tools
Resistor & SMD code decoders and an Ohm’s-law / divider calculator.
☰Glossary
Searchable acronym & term decoder for an acronym-dense trade.
§Standards Crosswalk
How each module maps to IPC-A-610, J-STD-001, 7711/7721 and more.
⎍Visual Guides
Drawn schematic symbols, component gallery, and annotated test gear.
Document — the printable Toolkit
Repair Traveler
A full hand-off record: findings, measured-vs-expected, root cause, sign-off.
◫Golden-Board Sheet
Capture a known-good board’s signatures to diff against suspects.
☑Bench Checklists
ESD/FOD, power-on sequence, and the first-5-minutes ritual.
⚠Failure-Mode Card
Every part: how it fails and how to confirm it.
⊞Pocket Cards
Color codes, diode thresholds, logic levels, polarity — wallet-sized.
✔Competency Sign-Off
Turn the course into a filed training record a supervisor can sign.